Item Type: Car Battery Jump Starter
Size: Approx. 18x11x6cm / 7.09x4.33x2.36in
Battery Type: 2500mAh lithium Battery x 4
USB Output: 12V/1.5A
Starting Current: 600A
Peak Current: 2000A
Fire Retardant Level: V0
Maximum Pressure: 150PSI
Operating Temperature Range: -30℃~65℃
How to Use:
1. The car starting steps should not be reversed, and the positive and negative poles should not be reversed.
2. The metal wires on the positive and negative terminals of the battery clamp metal head box battery should be in full contact. Dust or rust should be cleaned up first,
3. Confirm that the power supply is sufficient, the ignition start moment not more than 2 seconds.
4. If the battery is serious loss point or no power, please detach the battery start. That is to remove the negative battery cable, red and black clamps are connected to the positive and negative cable start.
5. If one start is unsuccessful, please start again after an interval of more than 30 seconds.
6. If you use the smart clip, the smart clip is correctly connected to the car battery cable, to be changed to green light state, before starting the car. If it keeps flashing or red light state, it means the operation is wrong.