Audix D2 Bundle Overview

The Audix D2 is well suited for use in stage, studio, and broadcast applications, and features the frequency and sensitivity response required for accurately reproducing signals from drums and percussion instruments. The mic has a dynamic element capable of reproducing signals with high transient peaks, while maintaining a clear, punchy, and warm sound.

The D2 offers a frequency response of 68 Hz to 18 kHz which features a slight bump in the mid-bass frequencies. The contoured mid-bass response accentuates the tonal frequencies associated with instruments that have a percussive nature, such as rack toms, congas, floor toms, saxophone, brass, horns, as well as guitar and bass cabinets. The hypercardioid polar pattern provides a tight pickup area at the front of the capsule for isolation and feedback control, and it is equipped with a VLM (Very Low Mass) diaphragm for natural, accurate sound reproduction. Ambiance and noise at the off-axis sections of the microphone are greatly reduced, resulting in high signal-to-noise ratio.

This bundle includes an On-Stage DM50 Drum Rim Mic Clip is a microphone clip designed to allow the placement of a microphone on a drum rim. It features a 5/8"-27" threaded end and a black finish. This unit is designed to fit drums with rims as tall as 1-3/8" and works equally well with most flanged, die-cast, and percussion rims. Use this practical microphone clip to perfectly position your microphone for optimum recording results.

Box Contains

Audix D2 Dynamic Instrument Microphone

Microphone Clip
Zippered Pouch
Limited 5-Year Warranty

On-Stage DM50 Drum Rim Microphone Clip

1-Year Limited Warranty