Shopping security
Class I stereo PA amplifier with SMPS, 2 x max. 6000 W (2 ohms), 2 x max. 3900 W (4 ohms)
| Power supply: | 230 V AC, 50 Hz |
| Power consumption: | 1050 W 1/8 power |
| Protection class: | Protection class I |
| Output power: | 2 x max. 6000 W (2 ohms) 2 x max. 3900 W (4 ohms) 2 x max. 2300 W (8 ohms) 1 x max. 10000 W bridged (4 ohms) 1 x max. 6200 W bridged (8 ohms) |
| Power connection: | Fixed power supply cord with safety plug |
| Cable length: | 1.6 m |
| Frequency range: | 20 - 20000 Hz |
| S/N ratio: | >90 dB |
| THD: | <0.05 % at 1 kHz |
| Cooling: | 3 x temperature-controlled fan , air flow from front to rear |
| Impedance: | Input: 10 kOhm , unbal. Input: 20 kOhm , bal. |
| Gain: | 38 dB/ 0.775 V 32 dB/ 1.0 V 26 dB/ 1.4 V |
| Housing color: | Black |
| Circuitry: | Class I |
| Slew rate: | >10 V/µs |
| Damping factor: | >200 |
| Control elements: | Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch, limiter selector |
| Controls: | Overheat; overload; short-circuit; softstart; DC voltage; VHF; limiter |
| Status LED: | Power, level meter, clip, protect |
| Connections: | Input: line via 2 x 3-pin XLR (F) mounting version Output: line via 2 x 3-pin XLR (M) mounting version Output: speaker via 2 x speaker built-in socket (F) |
| Input sensitivity: | 0.775 V; 1.0 V; 1.4 V , switchable; 26 dB; 32 dB; 38 dB , switchable |
| Use of brands: | Built with NEUTRIK connector |
| Material: | Steel |
| Housing design: | (19") 48.3 cm rack installation 2 U |
| Dimensions: | Width: 48.3 cm Depth: 44.0 cm Height: 8.9 cm |
| Weight: | 14.20 kg |
Ships within 48 hours · Estimated delivery Jun 20 - Jun 25
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order